Meeyi Y-670, Руководство пользователя, Страница: 13 / 14

13
Picture 3-43
3
．
3 Clock Alarm tone
The watch pager can set at most 10 sets of alarm (for setup method please refer to 3.2.5) to satisfy diverse
needs of users. When the time arrives at the set time and valid weeks, the watch will ring the buzzer, and the
screen will flicker for 1 minutes, as picture 3-39. When the alarm is working, users can press any buttons to stop
the alarm. The clock alarm will still work when power off.
4. Attentions
1.When the watch is in setting state, it cannot receive calls.
2.All the calling records will be deleted once the watch is power off.
3.When the watch is in calling state, short press
【
back
】
will only delete the current appeared calling record rather
than delete the added transmitters.
5. Technical parameters
1: Working voltage: built-in 3.7V rechargeable lithium battery, USB-5V to charge
2.Working current:<3mA
3.Standby current:<20uA
4.Receiving frequency: 433MHz
5.Receiving distance: 100 meters (open area)
6.Working temperature:-20℃--55℃
7.External size: 50×45×15mm (not including the watch strap)
6. Configuration listing
1. Watch Pager one pcs
2. USB Charger one pcs
3. User Manual one pcs
Users can choose to add one/ more button transmitters as needed. If users choose the transmitters from other
manufacturers, the key function of transmitters will need to be redefined( Setup method please refer to 3.2.2).
7 Common problems and solutions
Problems Reasons Solutions
1.The watch pager doesn’t respond
when pressing the transmitter buttons
1. Transmitters haven’t
been added successfully
2
．
The pager is short of
power
3
．
The signal receiving
function has been turned
off
1
．
Add a transmitter successfully
（
please refer to 3
．
2
．
1Transmitter
adding)
2
．
Replace a new battery for the
watch pager
3 Switch on the signal working
(reference to 3
．
1
．
4Signal setting)