Meech 976EX, Руководство по эксплуатации

Страница: 13 / 20

Fault Finding
Must only be carried out when the product is in a safe ( non-hazardous) area.
Tests must be completed by a qualified electrical engineer.
If in doubt contact Meech head office or your local distributor.
CAUTION: Whilst no danger to personnel exists, it is essential that any high
voltage ionising equipment, (exception Meech Model 910 Water Resistant
Ionising Bars), makes no contact with water or water based fluids.
Should such an event occur, disconnect immediately and return equipment to the
manufacturer for water damage assessment.
To verify where a fault may have occurred it is important to test each item of the
system individually. Should more than one bar be connected to a power supply, each
must be tested individually.
To check the Pulsed DC system follow the procedure detailed below:
9. Switch off the electrical supply to the system.
11