EN
32
Cleaning the battery
WARNING!
Always wear safety glasses and gloves when
cleaning.
• Clean the casing with a soft brush or dry
cloth.
• Do not use strong detergent or solvent,
this can damage the plastic parts on the
product. Stubborn dirt can be removed
with a cloth moistened with a mild
detergent.
• Keep the ventilation openings clean.
Blow clean the ventilation openings
with compressed air, if possible.
1. Place the battery charger on a level and
stable surface. Plug the charger into a
230 V power point.
2. Connect the battery to the charger so
that it clicks in place. The red LED on the
charger goes on when correct contact is
made.
FIG. 6
3. When the battery is fully charged, after
about one hour, the red LED goes off and
only the green LED stays on.
4. Unplug the charger from the power point
and remove the battery from the charger.
CONNECT THE BATTERY TO
THE TOOL
Connect the battery to the battery socket on
the tool so that it clicks in place.
REMOVE THE BATTERY FROM
THE TOOL
Press the battery lock and remove the battery
from the tool.
MAINTENANCE
WARNING!
Always remove the battery before
maintenance and/or cleaning.
• Check at regular intervals that screw
unions and retaining screws are tight.
• Repairs must only carried out by an
authorised service centre.
• Spray a suitable lubricant on all moving
parts at regular intervals.
Содержание Multiseries 016364
Страница 4: ...2 1 4 5 9 11 3 2 1 6 7 8 10 3 4 ...
Страница 5: ...6 5 ...