EN
33
TROUBLESHOOTING
Relieve the pressure, switch off the high-pressure washer and remove the battery before cleaning
and/or maintenance. See the troubleshooting schedule below in the event of any problems.
The inspection and repair of electrical components must only be carried out by qualified personnel.
Contact your dealer if you have any problems or questions.
Problem
Cause
Action
Substantial fluctuations in
pressure.
The nozzle (8) is blocked.
Rinse the nozzle (8) with fresh water.
If necessary, clean the nozzle according
to the cleaning instructions.
The product will not start.
The battery is discharged.
Charge the rechargeable battery.
Leakage in the water
system.
The connections are not correctly
connected.
Switch off the product and remove the
battery. Reconnect the connections
according to the instructions.
Supply pressure is too high.
Connect the product to a water pipe
with a maximum pressure of 5 bar.
Содержание Multiseries 016364
Страница 4: ...2 1 4 5 9 11 3 2 1 6 7 8 10 3 4 ...
Страница 5: ...6 5 ...
