Meec tools Multiseries 016364, Руководство по эксплуатации

Страница: 30 / 33

EN
30
FIG. 4
Switch settings by turning the nozzle holder.
An arrow on the top of the spray head indicates
the selected setting.
USING DETERGENT
The product is intended to be used with
neutral, biodegradable detergent. Other
detergent and chemicals can be dangerous
and/or damage the product. Such damage is
not covered by the warranty.
WARNING!
• Follow the instructions on the safety
data sheet for the actual detergent,
in particular the instructions concerning
personal safety equipment.
• Fill the container with detergent. Only
use detergent intended for the high-
pressure washer.
• Press the detergent bottle with the
opening down in the connection for the
detergent hose.
AFTER FINISHING THE WORK
1. If detergent has been used, flush fresh
water through the product to clean it.
2. Release the trigger (3).
3. Remove the battery from the product.
4. Disconnect the product from the water
supply.
5. Press the lock button (2) and then the
trigger (3) to relieve any residual pressure
in the system.
NOTE:
Running dry will damage the product.
Never use water from natural watercourse –
risk of contamination as a result of back flow
of detergent.
SPOOLING
IMPORTANT:
Never start the product when the water tap is
closed. Running dry will damage the product.
1. Connect the product to the water supply
before use and check that the connection
is tight.
2. Open the water tap.
3. Press the lock button (2) and then the
trigger (3). It is not necessary to keep the
lock button (2) pressed.
4. Release the trigger to stop the jet and
switch off the product.
WARNING!
The water jet causes the product to jerk when
the trigger is pressed. Keep a firm footing
and good balance at all times and keep a firm
grip on the product, otherwise there is a risk
of personal injury.
Switch off the product and remove the
battery in the event of leakage in the water
system. Reconnect to the water supply
according to the instructions.
ADJUSTING THE NOZZLE
The spray head has a nozzle with six different
settings.
• Jet angle 0°/15°/25°/40°
FIG. 2
• Upward jet
FIG. 3
• Soft, wide jet for watering/cleaning