Meec tools 726-727, Руководство по эксплуатации

Страница: 43 / 56

ENGLISH
43
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
Read all warnings, safety instructions and other directives. Failure to observe warnings and instructions
may result in electric shock, fire and/or serious personal injury. Save all warnings and safety instructions
for future reference. The term "power tool" in all warnings below refers to your mains-powered (corded) or
battery-powered (cordless) power tool.
Work area
•
Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents
and injuries.
•
Do not use power tools in explosive environments, such as in the vicinity of flammable liquids,
gases or dust. Power tools produce sparks that can ignite dust and fumes.
•
Keep children and onlookers at a safe distance when using the power tool.
•
You can easily lose control of the power tool if you are distracted.
Electrical safety
•
Always check that the mains voltage at the workplace corresponds with the data specified on the
machine's type plate.
•
The mains plug on the power tool must match the mains socket. Never modify the plug in any way.
Never use an adapter with earthed (grounded) power tools. Unmodified plugs and matching outlets
reduce the risk of electric shock.
•
Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There
is an increased risk of electric shock if your body is earthed.
•
Do not expose power tools to rain or damp conditions. There is an increased risk of electric shock if
water enters a power tool.
•
Be careful with the power cord. Never use the cord to carry or pull the power tool or to pull out the
plug from the mains socket. Keep the power cord away from heat, oil, sharp edges and moving
parts. Damaged or tangled cords increase the risk of electric shock.
•
If using the tool outdoors, only use an extension cord approved for outdoor use. Cords intended for
outdoor use reduce the risk of electric shock.
•
If it is absolutely necessary to use power tools in damp conditions, use a mains connection
protected by a residual current device. Use of an RCD reduces the risk of electric shock.
Personal safety
•
Pay attention to what you are doing. Remember to use all necessary safety precautions and
common sense when working with power tools. Never use power tools if you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention when using a power tool can
result in serious personal injury.
•
Use safety equipment. Always wear eye and ear protection. Depending on the type of power tool
and how it is used, safety equipment such as dust masks, non-slip safety shoes and protective
helmets reduce the risk of personal injury.
•
Do not overreach. Always maintain a firm footing, this will ensure you have better control over the
power tool in unexpected situations.
•
Wear appropriate clothing. Do not wear loose-fitting clothing or jewellery. Keep hair, clothing and
gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in
moving parts.
Power tool use and care
•
Do not force the power tool. Use the correct electric tool for the planned work. The tool does the job
better and safer when used at the rate for which it was designed.
•
Do not use the tool if it cannot be switched on and off using the power switch. Power tools that
cannot be controlled with the power switch are dangerous and must be repaired.
•
Always disconnect the power cord from the mains power before making any adjustments, changing
accessories or putting the power tool away. These safety precautions reduce the risk of accidently
starting the power tool.