EN
30
TROUBLESHOOTING
Problem
Possible cause
Action
The product will not
start.
The plug is not plugged in, or the
power point is without power.
Plug the plug into a power point
connected to the mains.
The power cord is damaged.
Check that the product is correctly
connected to the power supply.
The fuse has tripped.
Check the fuse and reset, or replace
if necessary.
The carbon brushes are worn.
Have the carbon brushes checked,
and if necessary replaced, at an
authorised service centre.
The power switch is faulty.
Have the switch checked, and if
necessary replaced, at an authorised
service centre.
The product
overheats during
the work.
Start the product with the power
switch and run it with no load for
2 minutes.
Poor action.
The bit is blunt.
Sharpen, or replace the bit.
Poor lubrication.
Remove the crank arm cover, fill up
with grease and replace the cover.
Содержание 011638
Страница 4: ...2 1 a b c d e 1 2...
Страница 5: ...3 5 6 7 4 1 2 1 2 1 2 1 2 2 1...
