Meec tools 008121, Руководство по эксплуатации, Страница: 27 / 32

EN
1
• Unsuitable extension cords can risk
causing a fire and/or electric shock. An
extension cord must not be longer than
10 metres, with a cross-sectional area of
the wires of at least 2.5 mm² to supply
power to the motor. Do not use
insufficiently insulated connections.
Connections must be appropriate for
outdoor use.
• Check that the mains voltage corresponds
to the rated voltage on the type plate and
that the circuit is correctly fuse protected.
Check that the power cord, plug and
power point are earthed and that the
power point has a residual current device.
Avoid body contact with earthed surfaces
such as pipes, radiators, cookers and
refrigerators.
• Never open the pushbutton box on the
motor. The box must only be opened by
authorised electricians.
• Do not touch metal parts of the plug
when connecting or disconnecting it.
• The product must only be used by one
person at once. Keep children and
onlookers at a safe distance when using
the product. Never allow anyone to help
you release logs that have got stuck.
• Check that there are no nails or other
foreign objects in the logs. The ends of the
logs must be cut at right angles. Branches
must be cut off flush with the log.
• The surface must not be slippery.
• Always maintain a firm footing and good
balance.
• Never stand on the product. There is a risk
of serious personal injury if the product
tips over or the user touches sharp parts.
Do not store anything above or near the
product, where someone could be
tempted to stand on it to reach up.
• Pay attention to the movement of the
product.
• Do not attempt to add or remove logs
until the piston has stopped in its home
position.
SAFETY INSTRUCTIONS
• Read the instructions and stickers on the
product. Understand the functions and
limitations of the product, including
potential risks and dangers during both
use and storage.
• Never use the product if you are tired or
under the influence of drugs, alcohol or
medication.
• Place the product on a flat, stable,
horizontal 60 to 75 cm high bench, with
plenty of space for the user to handle the
logs. Screw the product to the surface if it
slides.
• Keep the work area clean and well lit.
Cluttered work areas increase the risk of
accidents and injuries.
• Do not use the product in damp or wet
areas. Do not expose the product to rain.
• Do not use the product in an explosive
environment, e.g. near flammable liquids,
gas or dust.
• Always carefully check the product before
use. The safety devices must be fitted
correctly and work properly. Always check
that Allan keys/spanners etc. have been
removed from the product before starting
it. Replace any damaged, missing or
broken parts prior to use.
• Do not wear loose-fitting clothing,
jewellery or watches that can get caught
in moving parts.
• It is recommended to wear safety gloves
that are not electrically conductive and
non-slip shoes. Wear a hair net if you have
long hair.
• The product can eject objects that can cause
permanent eye injuries. Wear safety glasses.
Normal glasses only have shock-resistant
lenses. They are not safety glasses.
• Do not use the product with it placed on
the floor or the ground. This will result in
an awkward working posture, where the
user’s face comes close to the product –
risk of being hit by splinters etc.