Meec tools 005876, Руководство по эксплуатации

Страница: 34 / 36

EN
34
IMPORTANT:
To put in the locking screw, carefully move
the wires away inside the tube with a round
object. Do not use sharp or pointed objects
that can damage the wires.
ADJUST THE HANDLE
1. Adjust the handle to a convenient working
position.
2. Tighten the adjuster screw.
FIG. 6
USE
INTENDED USE
The electric snow shovel is intended to remove
snow from paths and other similar places
outdoors. The snow shovel is not intended for
commercial use.
CONNECTION TO POWER POINT
1. Make a loop in the extension cord.
FIG. 7
2. Put the loop through the hole on the back
of the top handle and hook it on the stress
reliever.
FIG. 8
3. Connect the extension cord to the snow
shovel. Secure the extension cord so that
it cannot come loose during the work.
FIG. 9
4. Plug the extension cord into a power
point.
STARTING AND STOPPING
1. To start the snow shovel press the safety
lock on the top handle with your thumb
and press the power switch with your
fingers. When the motor starts the safety
lock can be released without the motor
switching off.
2. Switch off the snow shovel by releasing
the power switch.
IMPORTANT:
Carefully inspect the area where the snow
shovel is to be used and remove any stones,
toys, or other foreign objects that can be
pulled into the snow screw and thrown out.
TIP
• Start the snow shovel and tilt it so that
the snow blade rests on the ground. Push
it forward. Adjust the speed to clear away
all the snow. The best speed depends on
the depth of snow and its weight.
• Direct the snow to the left or right by
putting the snow shovel at a slight angle.
• For the best results, throw the snow
downwind and run with overlapping
movements.
• If the snow is deep, hold the top and
bottom of the handle and work with
sweeping movements to remove the top
layer. Up to 15 cm of snow can be
removed in each sweep. Do several
sweeps to clear all the snow.
• Keep the power cord away from obstacles,
the snow screw and other sharp objects or
edges. Do not jerk the power cord and
avoid treading on it or running over it.
• Always switch off the snow shovel and pull
out the plug after use.
MAINTENANCE
WARNING!
• Switch off the snow shovel and pull out
the plug before cleaning and/or
maintenance. If the snow shovel is
unintentionally started while cleaning/