7
MDS86845 (GPI171)
Revised (A): 09/13/2013
Front Wheel Assembly
NOTE:
The front wheels are the ones that swivel.
• Ensure these are mounted so that the bend turns toward the floor.
Figure 6
.
Figure 6
Seat Heights provided by leg adjustments (set to Dimension A above):
1.
Insert wheel to desired height depicted by numbered holes (set to the same number
as rear wheels).
Figure 7
.
2.
Place triangular hand screw into hole. Make sure triangular hand screw stays on the
outside of rollator frame.
Figure 8
.
3.
Tighten triangular screw until secure
(Important: Hand Tighten Only!)
.
Figure 8
.
4.
Repeat steps 1-4 for other front wheel.
Figure 7
Figure 8
Legs
Hole 1
Hole 2
Hole 3
Hole 4
Hole 5
Seat Height
25" (63.5 cm)
24" (61 cm)
23" (58.5 cm)
22" (56 cm)
21" (53.3 cm)
Chart 1
Note: 1 is the highest, 5 is the shortest setting.
Содержание MDS86845B
Страница 33: ...33 MDS86845 GPI171 Revised A 09 13 2013...
Страница 34: ...34 MDS86845 GPI171 Revised A 09 13 2013...
