MediSono P25 EXP, Руководство пользователя

Страница: 42 / 214

3 Preparing the System
30 Basic User Manual
3
�
4 Powering On/Off the System
!
●
Do not power off the system during a system upgrade or a data transmission.
●
An extra 30-60 seconds are needed for powering on the system if it is powered off in
an abnormal way previously.
●
If the system is configured with the µScan feature, do not connect the USB device to
the system before system startup.
●
Wait approximately 20 seconds before powering on the system again after powering it
off. Otherwise, a failure may result.
●
Do not unplug the system from the AC power outlet before the shutdown hint
disappears. Otherwise, the data may be lost or corrupted.
●
To maintain the safety and functionality of the system, maintenance must be
performed at least once every year. For details, refer to 15 System Maintenance.
3
�
4
�
1 Power ing On the System
1. Set the power switch on the rear panel to the position.
2. Press the key on the side panel to power on the system.
All operating indicators illuminates, the initial screen and the application mode screen
appear after the system completes the initialization.
3
�
4
�
2 Powering Off the System
1. Press the key on the side panel to power off the system.
2. Set the power switch on the rear panel to the position.
3
�
4
�
3 System Standby
If the system is idle for a set period, the screen saver will be activated. For details, refer to
Section 4.1.1 General Settings.
3
�
5 Adjusting the System
3
�
5
�
1 Adjusting the Monitor Arm
NOTE:
•
Be careful with your fingers when adjusting the monitor arm.
•
Lock four casters before you adjust the monitor arm.