MediSono P25 EXP, Руководство пользователя

Страница: 107 / 214

6 Acquiring Images
Basic User Manual 95
1. Enter the inactivated B+M mode, tap Steer M on the touch screen to set the number
of M lines.
Multiple M-lines display after selecting the desired number as the following figure
shows.
Figure 6-12 Inactivated Anatomical M-Mode Imaging Screen
2. Adjust the position and the angle of M line.
−
Press the confirm key on the control panel to select the desired M line.
−
Position the desired M-line by using the trackball.
−
Rotate the Angle knob on the control panel to adjust the angle of M line.
3. Press the Update key on the control panel to activate the anatomical M-mode.
NOTE:
Once the anatomical M-mode is activated, you can move the trackball to stop the
M trace and adjust the M line. The system continues tracing if the trackball is idle
for more than 0.5s.
4. Optimize anatomical M-mode images. For details, refer to Section 6.4.3 Optimizing
M-Mode Images.
5. Press the M key again to exit the screen.
6
�
4
�
3 Optimizing M-Mode Images
The touch screen displays all controls related to the M-mode imaging (as shown in the
figure), you can use them to optimize M-mode images.
10
2D Imaging
5
M-line
0