Medion LIFE S14900, Руководство по эксплуатации

Страница: 64 / 86

64
Timeshift recordings are not stored permanently and shown in the list of
recordings. The timeshift recording is deleted during playback so that it is
possible to view programmes with a time delay continuously, without be-
ing limited to the storage capacity. The memory space required always cor-
responds to the time delay.
9.8.2. Timeshift function during PVR recording
You can also view the programme with a time delay during PVR recording. To do so,
proceed as follows:

In TV mode, press the

button. The currently selected programme then starts
being recorded. At the same time, a progress bar opens featuring the media but-
ton options.
You can select these options during the timeshift recording:

−

: Stops the recording
−

: Time-delayed playback of the current recording. The recording runs in the
background again (timeshift function)

Then press the

button. The current recording is now played back starting
from the time the recording began. The recording continues to run in the back-
ground, allowing the programme to be played back with a time delay.
The following options can only be selected when playing a recording:
−

: Activate A-B playback

−

: Stop playback
−

: Pause playback

−

/

: Fast forward/rewind
− : Slow-motion feature (2, 4, 8, 16, 32 x slower)

−

: Set the time that playback is to start

− / : Skip forwards/backwards in 30-second increments

A-B playback: Mark the start point A for a loop playback by pressing the

button again. Pressing the

button several times defines the end point B. The
section between the two points is now repeated in a continuous loop. To exit
A-B playback mode, press

. You return to timeshift playback.

To exit timeshift mode, press

again. The current programme is then shown in
real time again. The started PVR recording continues running.

To stop this, press

again. Confirm the subsequent prompt by pressing OK .
If you are using the timeshift function during recording, a normal PVR re-
cording also always runs in the background, and this is then displayed in
the PVR recording list.