Medion E12203, Руководство пользователя

Страница: 44 / 54

45
Troubleshooting
Troubleshooting
Error Action
There is no picture
and no sound. • Check if the power cable is inserted properly into the socket.
• Check if signal reception is set to TV .
There is no AV
picture. • Check to ensure that the contrast and brightness settings are correct.
• Check to ensure that all external devices have been connected properly.
• Check to ensure that you have selected the correct AV source.
There is no sound. • Ensure that the volume has not been set to the minimum level.
• Ensure the mute setting is not active. Do this by pressing the button in the top left
of the remote control with the crossed out loudspeaker symbol.
• Check whether headphones are connected.
There is no picture
and no sound. I can
hear noise, though. • The reception might be poor. Check if the antenna is connected properly.
The picture is not
clear. • The reception might be poor.
• Check if the antenna is connected properly.
The picture is too
bright or too dark. • Check the settings for contrast and brightness.
The picture is not
sharp. • The reception might be poor.
• Check if the antenna is connected properly.
• Check the settings for sharpness and noise reduction in the PICTURE menu.
There is a double/
triple picture. • Check if the antenna is aligned properly.
• Waves might be refl ected off buildings or mountains.
The picture is
pixellated. • There might be interference from cars, trains, power lines, neon lights, etc.
• There might be interference between the antenna and power cables. Position the
cables further apart.
There are stripes on
the screen or the
colours are faded. • Is there interference from another device?
• Transmission antennae on radio stations, ham radios and portable phones can
also cause interference.
• Operate the device as far away as possible from the device that might be causing
the interference.
The buttons on
the device are not
working properly. • The child lock might be on.
The remote control is
not working. • Check if the batteries are fully charged and have been inserted in the right
direction.
• Ensure the sensor fi eld is not exposed to strong light.
TV switches off • Check whether the automatic TV switch off function is activated under TIME (see
page 30).
The disc won't start
even though

(PLAY) has been
pressed, or it starts
and then stops
immediately.
• Is the disc inserted with the label side facing to the rear?
• Check whether the disc is damaged by trying another disc. If the disc is dirty, clean
it carefully, wiping it from the centre to the edge with a soft, dry cloth.
• DVD: Does the DVD have the correct regional code (2)?
• If condensation has formed inside the device: leave the player for one to two hours
to dry off.