Medion E12203, Руководство пользователя

Страница: 13 / 54

14
Safety instructions
−
Only plug the AC adapter of the HD LED LCD TV into an earthed socket with 220 - 240 V ~ 50
Hz. Contact your electricity provider if you are not sure if the socket is earthed or not.
−
The power socket must be close to the HD LED LCD TV and easy to access.
− To disconnect the power supply from your monitor, pull the mains plug from the power
outlet.
− For extra safety, we recommend using an over-voltage protection device to prevent your
HD LED LCD TV sustaining damage as a result of power surges or lightning strikes.
−
Position the cables so that they cannot be stepped on or tripped over.
−
Do not place any objects on the cables as they may be damaged.
Handling batteries
WARNING!
Risk of explosion!
Batteries may contain combustible materials and leak, heat up excessively, ignite or even explode.
− Avoid improper handling of the batteries to prevent damage to your device and your health.
Please follow the safety advice below closely:
−
Keep batteries away from children.
If batteries are swallowed, consult a doctor immediately.
−
Never charge batteries (unless they are designed to be recharged).
−
Never empty the batteries by means of high power output.
− Never short-circuit the batteries.
− Never expose the batteries to excessive heat, such as sunlight, fi re or similar sources of
heat!
− Do not dismantle or deform the batteries.
You could injure your hands or fi ngers, or battery fl uid could come into contact with
your eyes or skin. If this happens, rinse the affected areas with plenty of clean water and
consult a doctor immediately.
−
Avoid heavy impacts and vibrations.
−
Always observe the correct polarity.
− Make sure that the plus (+) and minus (−) poles are correctly inserted to avoid short
circuits.
− Do not mix up new and old batteries or different types of batteries.
This could cause your device to malfunction. In addition, the weaker batteries would discharge
too much.
−
Remove spent batteries from the device immediately.
−
Remove the batteries from the device if you do not intend to use it for a long period of
time.
−
Replace all of the old batteries in a device with new batteries of the same type.
− Cover the contacts of the batteries with sticky tape if you want to store or dispose of them.
− If necessary, clean the battery and device contacts before insertion.