Mounting the MLC 62 RS EU and the MLC 62 RS MK
ATTENTION:
•
Ensure that the junction box is grounded properly.
•
Assurez vous que le boîtier d’encastrement est correctement mis à la terre.
To mount the MLC 62 RS EU and MLC 62 RS MK to an electrical box:
1.
Attach the provided metal mounting bracket to the mounted electrical box using two
of the included screws in the slots at the top and bottom of the bracket.
NOTES:
•
To keep the MLC securely in place and prevent it from being easily pulled
from its mounting surface, ensure that the side of the bracket with the word
“Front” engraved on it faces
out
(away from the electrical box).
•
If you want to be able to remove the MLC easily from its mounting, attach the
mounting bracket with “Front” facing inward, toward the junction box.
2.
Run the cables through the electrical box and the plastic wall frame.
3.
Connect all cables to the MLC and disconnect power from all devices at the source.
4.
Align the wall frame to the metal mounting bracket on the mounting surface.
5.
Holding the wall frame in place on the bracket, press the MLC into the frame until the
unit snaps into place.
Electrical
Junction Box
Wall Frame
Metal Bracket
MLC 62 EU
VOLUME
DISPL
AY
MUTE
LAPTOP
OF
F
ON
PC
VIDEO
Figure 39.
Mounting the MLC 62 RS EU to an Electrical Box
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation
38