MediaFORM AP 1301, Руководство оператора

Страница: 21 / 33

AP-1301 i/t Operator’s Guide
Document Revision: 100102
Page 20
Operation
If you have not already done so, be sure that you have read the section entitled “Getting
Started”. This section walks you through the preliminary setup of the unit, which must be
accomplished prior to operation.
The AP-1301 is broken up into three tabs. The Status Tab, the Job Tab, and the Label
Designer Tab. The Status Tab shows what print job is running, what is queued to run, and
what has been completed.
Before a print job can be submitted, the CD design must be produced. This can be done
in two basic ways. The primary way is to use the Label Designer tab of the AP-1301
application itself. We will detail this process in a moment. The other way is through a
graphic design software package that enables you to design your own template. From
there, rather than print to the printer itself, you simply change the print driver setting to
“Print to File”. This will generate a file with a .PRN extension, which can then be used as
the “Label File” when submitting a job.