MediaFORM AP 1301, Руководство оператора

Страница: 11 / 33

AP-1301 i/t Operator’s Guide
Document Revision: 100102
Page 10
The Best Place To Put Your System
The best place for your unit is in a climate-controlled area, free of dirt, dust,
humidity, excessive heat, and electronic or electromagnetic interference. As
your AP-1301 is network ready, you may want to locate it near a network
jack. Place the AP-1301 i/t on a firm and steady work surface, allowing
sufficient room for all of your work materials. Also, allow at least six
inches of clearance around the unit for ventilation.
Safety Precautions
Your system shipped with a three-prong power connector, and is intended
for use with properly grounded AC receptacles only. Do NOT try to defeat
the third “ground” prong. All computer peripherals should be properly
grounded, and the AP-1301 is no different. The use of a power conditioner,
such as a UPS (Uninterruptable Power Supply) or a surge protector, is
always recommended with sensitive computer equipment. If you are
considering using such a device, the minimum system recommended is
400VA.
Repairs should only be attempted by authorized, factory-trained
technicians. MediaFORM reserves the right to void the warranty if
unauthorized service is performed.