MediaFORM AP 1301, Руководство оператора

Страница: 15 / 33

AP-1301 i/t Operator’s Guide
Document Revision: 100102
Page 14
Spindle Designations
The AP-1301 uses three spindles. Spindle 1 is dual purpose, and is used for both input
and output. Spindle 2 is for output only. Spindle 3, like spindle 1, is also dual purpose
and is used for both input and output.
To start, place the desired number of discs to be printed on spindle 1. If you wish to
do a quantity greater than one spindle allows, place the remainder on spindle 3. The
processing of discs begins with the blanks being drawn from spindle 1, and the
printed out being placed on spindle 2. Once spindle 1 runs empty, discs will then be
drawn from spindle 3. The outputted product will then be placed on spindle 1. In the
end, all completed discs will be on the front most spindles.