18
DAILY MAINTENANCE
CLEANING SUCTION FILTER
1. Lift the cover
2. Take off the suction plug by rotating it counterclockwise
3. Take off the filter with the antifoam protection
4. With a water jet clean the walls and the bottom of the filter
5. Wash thoroughly all components
Reassemble everything repeating above-mentioned operations inversely
CLEANING SOLUTION FILTER
1. Unscrew the cup
2. Take off the filter
3. Clean it thoroughly
4. Reassemble everything once again, tightening the cup to the filter body
CLEANING OF THE SQUEEGEE
In order to have the best drying results, check that the squeegee is always
clean.
To clean the squeegee it is necessary to:
1. Take off the hose (1) from the squeegee
2. Release the squeegee
3. Clean the inside of the squeegee thoroughly
4. Clean the squeegee rubbers thoroughly
5. Reassemble everything once more
REPLACEMENT REAR SQUEEGEE RUBBER
If the rear squeegee rubber is worn and does not dry well, it is possible to
change the drying edge proceeding as follows:
1. Push and rotate the fixing plates (1)
2. Slip off the rubber blade and the rubber itself
3. Turn the rubber (2) upside-down and if necessary, replace it
4. Reassemble everything repeating inversely above operations
5. Adjust the squeegee height depending on wear of the rubber (see under
“ADJUSTMENT SQUEEGEE HEIGHT”)