13
PERFORMANCE
SETTING FOR WORK
1. Plug into the mains system
2. Turn the key of the general switch (1) into position
I
(clockwise).
Immediately, the signal lamp comes on (2)
2
1
0
I
3. Press the motor switch (1)
4. Press the solenoid valve switch (2)
5. Press the suction motor switch (3)
3
2
1
6. Acting upon the cock lever (1) adjust the quantity of the detergent solution
which has to be sufficient to wet the floor uniformly but not too much to get
out of the splash guard. Please keep in mind that, the correct solution
quantity depends always on the type of floor, the dirt and the speed.
7. Release the lever (2) and lower the brush base
8. Lower the squeegee acting upon the lever (3)
9. Check that the parking brake (4) is released
10. Pushing downwards the drive lever (1), the machine begins to move.
During the first metres of operating, check that the quantity of detergent
solution is sufficient and that the squeegee dries perfectly.
The machine will now start working efficiently until the detergent solution
runs out.
