19
DAILY MAINTENANCE
REPLACEMENT FRONT SQUEEGEE RUBBER
If the front squeegee rubber is worn, a good suction is not achieved and
therefore the machine does not dry perfectly. In that case proceed as follows
with the replacement:
1. Take off the squeegee loosening the register (1)
2. Loosen the nuts which block the front rubber blade
3. Slip off the rubber blade
4. Slip off the rubber and replace it
Reassemble everything repeating inversely above operations
1
DISASSEMBLY OF THE BRUSH
The procedure of the operations of the brush disassembly is the following:
1. Lift the brush base acting upon the lever (1)
2. Brake the machine acting upon the lever (2)
3. Switch off the motor switch (3)
4. Turn the key into position
0
(4) and take off the plug from the mains
system
5. Get hold of the brush and with a sudden rotation clockwise, release it
from the couplings.
ATTENTION!
This operation has to be carried out using gloves
to protect from contact with dangerous solutions
3
2
1
4
0
I
In case of difficulties, it is possible to take off the plastic cover by unscrewing
the knobs (1) on the sides and pulling it forwards.
1
