14
PERFORMANCE
MOVEMENT
The traction of these machines is obtained through a flat belt put
into tension with the lever (1) as indicated in the figure. The
movement speed is proportional to the force carried on the lever.
ATTENTION!
When carrying out even short backward
movements, make sure that the squeegee is lifted.
BRAKE
The machine is equipped with two braking systems. A working
brake controlled through the drive lever (1) and an emergency and
parking brake controlled through the lever (2). It is enough to
release the drive lever and the motor switches off.
Whenever problems during operating should arise, release the
drive lever and push immediately the emergency brake placed on
the left side. This command will block the traction of the machine.
To restart the machine again, once the problem has been solved,
release the lever of the parking brake and push downwards the
drive lever.
2
DEVICE TOO FULL
The machine is equipped with a float, which intervenes when the
recovery tank is full causing the closure of the suction hose.
It may be noticed, that the suction motor rises considerably its
revolutions. In that case, it is necessary to stop immediately the
suction motor and proceed with the emptying of the recovery tank
taking off the plug of the exhaust pipe.
ATTENTION!
This operation has to be carried out
using gloves to protect from contact with dangerous
solutions.
