medemagroup Mini Crosser X-Joy Скачать руководство пользователя страница 8

Страница: 8 / 84

Service manual 1533-2007-S

8 of 84

Version 1.0.3 - 2020

Medema Production A/S

Storage

The Mini Crosser is a CLASS C product, designed for use in all

types of weather. The scooter should, however, be stored and

charged under cover at temperatures in excess of 0°C. The

charger must also be kept dry.

If the scooter is not going to be used for a long time, it is advis

able to protect the tyres by chocking the scooter up. It is also a

good idea to cover the scooter to protect it from dirt, dust and

sunlight.

Cleaning

The Mini Crosser should be cleaned with a damp cloth. A little

washing-up liquid can be used if necessary. The plastic covers

can be polished with an ordinary glass cleaner or car wax.

Note!

Using a high-pressure cleaner or hose may damage the Mini

Crosser’s electronics.

Содержание Mini Crosser X-Joy





















































































Результаты поиска

Содержание Mini Crosser X-Joy

Отзывы:

Бренды по названию

Популярные бренды

medemagroup Mini Crosser X-Joy, Руководство по обслуживанию

Результаты поиска

Содержание Mini Crosser X-Joy

Отзывы:

Бренды по названию

Популярные бренды