manualshive.com logo in svg

medemagroup Mini Crosser X-Joy, Руководство по обслуживанию

Поделиться
Скачать
medemagroup Mini Crosser X-Joy Скачать руководство пользователя страница 17

Service manual 1533-2007-S

 17 of 84

Version 1.0.3 - 2020

Medema Production A/S

Designations functions

P&G R-net
1

Press the button 1 to start the Mini Crosser. Wait untill the battery indicator 

is stabil (3-5 sec).

2

Battery indicator

Show a more precis indication after approximately one minute of driving. 

When all the LED is lit, the batteries are fully loaded. When only a couble of 

yellow lights are visual - charge as soon as possible. If only the red LED are 

showing, or if they are blinking - charge right away. 

3

Driving profile show what the maximum speed are set to. There are five 

LED. One LED refer to lowest speed and five LED refer to maximum speed.

4

Warning blinkers - all blinkers are activated. Even if the vehicle is turned of, 

it will not stop blinking. To turn of the warning blinkers, the vehicle must be 

turned on, and press the button for warning blinkers button (4) again. 

5

Mode LED - lights up when the associated function is active

6

Light - turn the front- and backlight on. Turn it off again by pressing the light 

button (6) again.

7

Mode button - (electric functions). Scrolls through the available electric 

functions. Use joystick up/down to adjust.

8

Blinkers (right and left) start blinkers on the side the arrow shows.

9

Mode LED - lights up when the associated function is active

10

Joystick - controls the direction and speed of the vehicle.

11

Speed increase/decrease - increase or decrease the maximum speed. 

12

Horn - powerful electric horn.

1

5

6

12

7

8

  2

  4

  3

  9

11

10

Содержание Mini Crosser X-Joy





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды