medemagroup Mini Crosser X-Joy, Руководство по обслуживанию

Страница: 34 / 84

Service manual 1533-2007-S 34 of 84 Version 1.0.3 - 2020
Medema Production A/S
Area Component Check and remedy
Power consumption Power consumption on a level road
with a tyre pressure of 2.8 bar and
75-100 kg on the seat:
10 km/t = 20 - 25 A
13 km/t = 22 - 27 A
Measure on one of the battery ca-
bles using a clip-on ammeter.
Brakes and disengage-
ment
Check function
When the disengagement lever is
up:
It must not be possible to push the
scooter.
It must be possible to drive normally
when the scooter is turned on.
When the disengagement lever is
down:
It must be possible to push the
scooter.
The scooter must not be able to go.
Error 9 should appear when the ac -
celerator is activated.
The brake must be able to hold the
scooter on a 15° (26%) slope with
75 - 100 kg on the seat.
If not, it must be adjusted or re -
placed, depending on how much
wear there is.
Braking distance 10 km/h- 2.0 m (9)
13 km/h - 2.2 m (9)
The figures in brackets indicate the
normal braking parameter when the
scooter leaves the factory. It can be
changed with the programming unit
(forward deceleration). See below
for more information. Please note
that the braking distance must not
be longer than specified in order to
comply with official requirements.
Chassis / seat /
covers
Footplate Check the plastic rivets securing the
mat. Fit new ones if necessary.
Seat post Check that it is properly secured
and in good condition.
Seat Check that:
The release lever locks the seat
properly.
The seat is firmly secured on the
seat frame/plate.
The seat tube is in good condition. If
necessary, lubricate the tube with a
little acid-free grease.
The armrests are in good condition.