medemagroup Mini Crosser X-Joy Скачать руководство пользователя страница 23

Страница: 23 / 84

Service manual 1533-2007-S

23 of 84

Version 1.0.3 - 2020

Medema Production A/S

Driving the Mini Crosser X-Joy

Getting on and off

It is important to learn a safe technique for getting on and off the

Mini Crosser.

In general the following method should be followed:

• Make sure that the Mini Crosser X-Joy is turned off.

• Make sure that the brake is on. (Lever for disengaging motor in

top position.)

•

If necessary, turn the seat through 45° or 90° and make sure that

it is locked in position (clicked into place).

•

If necessary, raise the armrest.

For some users the assistance of an attendant can be recom-

mended. The attendant should:

•

Take care not to injure him/herself when lifting/lowering/supporting

the user.

• Make sure that the Mini Crosser is stable and unable to move.

Turn off the Mini Crosser and check that the brake is on and the

seat has been rotated until it clicks into place at either 45° or 90°.

• Make sure that the seat the user is being moved to is stable.

Turn the Mini Crosser off, rotate the seat

and raise the armrest.

Содержание Mini Crosser X-Joy





















































































Результаты поиска

Содержание Mini Crosser X-Joy

Отзывы:

Бренды по названию

Популярные бренды

medemagroup Mini Crosser X-Joy, Руководство по обслуживанию

Результаты поиска

Содержание Mini Crosser X-Joy

Отзывы:

Бренды по названию

Популярные бренды