medemagroup Mini Crosser X-Joy, Руководство по обслуживанию

Страница: 35 / 84

Service manual 1533-2007-S 35 of 84 Version 1.0.3 - 2020
Medema Production A/S
Area Component Check and remedy
Covers Check that the plastic covers are in
good conditions. Parts with sharp or
projecting edges should be re-
placed. The same applies to covers
with an operational function, e.g.
the splash guard and battery cover.
(water in the controller)
Cleaning: See the section on Clean-
ing.
Other mechanical com-
ponents
Check that the other components
work properly.
Electrical compo-
nents
Control card Check that it is dry and in a good
condition.
Check that all the connectors are
firmly in place.
Cables/plugs Check that the cables are firmly in
place and not sticking out in such a
way as to catch on something or get
trapped.
Check that the plugs are firmly in
place.
Battery straps Check that they are properly se-
cured.
Batteries/charger
(see also the sec-
tion on Batteries)
Batteries Check that there are no cracks in
the batteries, that batteries look
good and that the battery connec-
tions are firmly in place.
Battery capacity Check this with a battery tester. If
it indicates that new batteries need
to be fitted, take care to pair them
with an accuracy of 0.1 V. Apply a
little acid-free vaseline to the battery
terminals before connecting them.
Battery charger Check that the indicator lamp on
the battery charger changes to
CHARGING when the scooter is
connected.
If necessary, measure the charging
voltage during charging. It should
be approx. 28.8 V.
Leave the scooter to charge over-
night. Disconnect the charger and
measure the battery voltage after
about 15 minutes. It should be ap -
prox. 27.6 V for fresh batteries.
Check that the scooter cannot go
while the battery charger is con -
nected.