Initial operation
Mounting accessories
18
GA 5752 3125 GB 10
3
3.2.3
Version B
22
11
33
44
66
88
55
77
Fig. 4: Version B
Tapping units with rail clamp and NIST
connection
With the upper edge of the guide groove at
the front, position the rail clamp (1) at a
slight angle on the equipment rail (2) and
then press it against the equipment rail and
allow it to click into place.
Make sure that the rail clamp is correctly
secured and that the tapping unit is in a
stable position on the equipment rail. The
locking lever (3) must be flush with the rail
clamp.
Insert the NIST nipple (4) of the connection
tube into the NIST connection (5) of the
tapping unit and tighten down the NIST
screw connection (6) by hand.
Plug the gas probe (7) of the connection
tube into the terminal unit (8).
3.3
Mounting accessories
3.3.1
General
WARNING!
Tensile forces!
The connected accessories must not exert any mechanical forces which could
adversely affect the secure fit of the product.
WARNING!
Tensile forces!
Hold the basic unit with one hand when installing or removing accessories in order
to compensate for the tensile forces which are created.
NOTE
Refer to the manufacturer's instructions for additional information on the use of the
septic fluid jar and the extraction utensil.
