MED Automotive MED 6000.LW, Руководство пользователя

Страница: 10 / 20

USER’S PROGRAMS
INSTALLER SECTION PAIRING WITH THE VEHICLE
AND WITH THE INSTALLED ACCESSORIES
WARNING: Every change in these parameters can
Compromise the correct working of the system.
The central unit works even without the a.m. Programmings.
(11 TIMES)
Cutting out /
Cutting out /
Out of order /
Cutting out /
3 seconds locking / unlocking
10 seconds at locking - 1,25 seconds at unlocking
30 seconds at locking - 1,25 seconds at unlocking
Timed (10 sec. Standard) /
30 seconds
45 seconds
30 seconds
50 seconds
Fixed /
Cutting out /
Cutting out /
Low
High
With 2 wires by relays separated channels (right/left side separated) - “USUAL CONNECTION”
Single negative CONTINUOUS control
3 alarm cycles /
Standard values setting
DIRECTION INDICATORS'S FLASHING ACTIVATION / DESACTIVATION
3 Activation - standard setting
ACOUSTIC SIGNALINGS ACTIVATION / DESACTIVATION
4 Activation - standard setting
5 On duty - standard setting
BUTTON INPUT CUTOFF / ACTIVATION (Light Blue/White wire)
6 Activation - standard setting
SETTING OF THE DOORS LOCKING/UNLOCKING TIME
7 1,25 seconds locking / unlocking - standard setting
8
9
10
FIXED / TIMED STATUS SIGNAL
11 Fixed - standard setting
TIME OF THE STATUS SIGNAL IF TIMED
12 10 seconds - standard setting
13
14
DELAYED TIME ON ACTIVATION BUTTONS (Light Blue/White wire)
15 Simultaneous (0 second) - standard setting
16
17
ALARM OUTPUT
18 Intermittent - standard setting
ANTI-TAMPERING OF THE ULTRASONIC SENSOR
19 Activation - standard setting
ULTRASONIC SENSOR
20 Activation - standard setting
ULTRASONIC SENSOR SENSITIVITY
22
23 Medium - standard setting
24
DIRECTION INDICATORS CONTROL
25
26 Single negative control with starting and final blinking IMPULSE - standard setting
27
ALARM CYCLES NUMBER FROM BUTTONS INPUTS
28 1 alarm cycle - standard setting
RESET OF THE INITIAL CONDITIONS PROGRAMMED AT DEFAULT
35
8