Mecon HTL040, Руководство по эксплуатации

Страница: 14 / 32

14
© MECON GmbH BA / mag-flux HTL / EN / 21-04
INSTALLATION AND MODE OF OPERATION
You will be taken to the main menu by pressing the "ON button" again.
Start measurement
Settings
→ Turbidity
Bluetooth Mode
Back
Start measurement
→ Settings
Turbidity
Back
Save interval
Memory management
Date
Time
Lighting time
Change Password
Standby
Language
Software version
Back
Save interval
hh mm ss
00 00 01
→
If the device is equipped with a turbidity
measurement (seperat sensor necessary) ,
before starting the measurement it should
be determined whether this value should
be documented or not. If these data are
required for measurement, they must be
present.
3.5 Settings
Using the "ON button" and the "BT button", select "Settings" and confirm with the "OFF /
Enter button".
The arrow keys ("ON key" or "BT key") can
be used to set the parameter marked by
the underscore. This action is confirmed
by pressing the "OFF / Enter key" (hours:
minutes: seconds).
A storage interval of 1 second is set in the
as-delivered condition.
3.5.1 Save interval