Mecon HTL040, Руководство по эксплуатации

Страница: 29 / 32

29 © MECON GmbH BA / mag-flux HTL / EN / 21-04
SERVICE
8 SERVICE
8.1 Storage
Store the emptied device in a dry and dust-free place. Keep away from direct heat and
sunlight. Avoid external loads on the device. The permissible storage temperature is
-20 °C to +60 °C.
8.2 Maintenance
The hydrant tester "mag-flux HTL" is maintenance-free. It is recommended that the device
be returned to the manufacturer for recalibration after two years, depending on the con
-
ditions of use (see point 8.3 Return of the device to the manufacturer). This will guarantee
a long and trouble-free service life.
8.3 Returning the device to the manufacturer
Due to careful manufacturing processes and final checks on the device, the mag-flux
HTL is expected to operate trouble-free, where both installation and operation are in
accordance with these instructions
Should you nevertheless need to return a device to MECON GmbH please observe the
following points:
Caution!
In order to protect the environment and safeguard the health and safety
of our personnel, all devices sent to MECON GmbH for repair must be free
of toxic and hazardous substances. This also applies to cavities in these
devices. If necessary, the customer is kindly requested to neutralise or
rinse these devices before returning them to MECON GmbH. The customer
must confirm this by completing and sending in the returns form on the
MECON GmbH.website This can be found at
»
https://www.mecon.de/en/device-returns/