Mecon HTL040, Руководство по эксплуатации

Страница: 18 / 32

18
© MECON GmbH BA / mag-flux HTL / EN / 21-04
START-UP
After that, the following dialogue box ap -
pears:
When measuring with data storage in
the device (and the possibility of subse-
quent further processing by means of the
optionally available evaluation software,
LOG-CONTROL), the following selection
must be made:
The following display appears for the
alphanumeric description of the measuring
point:
The underscored letter can now be replaced by pressing the arrow keys ("ON / BT key"),
either with a different letter, number or special character. The following contents can be
displayed (maximum 15 characters):
Letters:
A … Z / a … z
Numbers: 0 … 9
Special characters: _ : ( ) + -
Please confirm the change with the "OFF / Enter key".
This allows the measured values to be assigned to a measuring point description.
It can be selected note the arrow keys ("ON key" or "BT key") you can select whether a
measurement is made with the measuring point and the associated data being stored on
the device or a measurement without storage of the data.
4.2 Start measurement with save
→
→
Save measurement
Measurement without saving
Back
Save measurement
Measurement without saving
Back
Description
A