Mecon HTL040, Руководство по эксплуатации

Страница: 19 / 32

19 © MECON GmbH BA / mag-flux HTL / EN / 21-04
START-UP
By holding the "OFF / Enter key" longer, the
following appears:
If you want to stop the measurement, press
and hold the "OFF / Enter" key and then the
following appears:
From now on, all measured values will be stored - the information "REC" for record will
appear in the display at the top right. In addition to the current measured values of flow
rate and absolute pressure, the total flow rate is displayed in the lower right corner of the
display.
Note: To display in l/min or l /s, the "ON button" must be pressed.
→
Should the measurement be stopped?
Yes
29.03.21 15:07 REC
0.09
0.00
m³/h
bar
Total 0.00 m³
Afterwards, confirm by pressing the "OFF / Enter key". The measurement is now complete
and the start screen appears.
4.3 Start measurement with save (optionally with turbidity measurement)
Start measurement
Settings
Turbidity
Bluetooth Mode
Back
To measure with turbidity, please select the
main menu item "Turbidity" and press the
"OFF / Enter key".