mecalac AS 150e, Руководство по обслуживанию

Страница: 8 / 19

S160/S161/S165/Z162 8-8
8 Maintenance
1 2 3 4
8.2.6 Oil change, axles
8.2.6.1 Rear axle
(1) Place a sufficiently large oil drain pan underneath.
(2) Unscrew the plugs from the axle arch (8-13/1,
8-13/2, 8-13/3, 8-13/4 and 8-14/arrow) and drain the oil.
CAUTION
Waste oil must be disposed of in such a way that
it will not cause pollution!
(3) Replace the plugs for the axle arch (8-13/1, 8-13/2 and
8-13/3).
(4) Fill oil into the plug bore of the axle arch (8-13/4 or
8-14/arrow) until the oil level reaches the opening.
N O T E
- Details regarding the amount of oil required
are given in the maintenance plan (page 8-1).
- After a few minutes, when the oil level has
lowered, top up the oil until the oil level
reaches the marked level and remains stable.
- The vent valve of the axle (8-15/arrow) must be
free from dirt.
(5) Screw in the plugs of the axle arch (8-13/4 and 8-14/
arrow) again.
Figure 8-14
Figure 8-13
Figure 8-15