mecalac AS 150e, Руководство по обслуживанию

Страница: 11 / 19

S160/S161/S165/Z162 8-11
Maintenance 8
1
3
2
2
3
4
1
Figure 8-22
(5) Unscrew the drain (8-22/3) and inspection plugs
(8-22/4) and drain the oil from the lower oil compartment.
CAUTION
Waste oil must be disposed of in such a way that
it will not cause pollution!
(6) Screw the plugs (8-22/2 and 8-22/3) back in with new
gaskets.
(7) Fill in oil through the filling plug bore of the upper oil
compartment (8-21/1) until the oil reaches the mark on the
dipstick (8-22/1).
(8) Fill in oil through the filling plug bore of the lower oil
compartment (8-21/2) until the oil reaches the lower edge
of the oil inspection bore (8-22/4).
NOTE
- The transmission housing temperature must
be at least 60 °C (warm up if necessary).
- Details regarding the amount of oil required
are given in the maintenance plan (page 8-1).
- When the oil level has lowered – not earlier than
after 15 minutes - top up the oil until the oil
reaches the marked level and remains stable.
(9) Screw the filling (8-21/1 and 8-21/2) and inspection
plugs (8-22/4) back in with new gaskets.
8.2.7.2 Oil change distribution gear
Type 2:
(1) Open battery and tool compartment on the left side of
the loader.
(2) Move the bucket arm all the way to the left or right and
remove the front cover plate below the driver’s cabin in the
swivel unit area.
(3) Place a sufficiently large oil drain pan with a drain
channel underneath.
(4) Unscrew check plug (8-7/arrow), filling plug (8-8/arrow)
and drain plug (8-24/1) of the upper oil compartment
(clutch compartment) and let the oil drain off via a drain
channel.
(5) Unscrew check plug (8-24/3), filling plug (8-23/arrow)
and drain plug (8-24/2) of the lower oil compartment (spur
gear compartment) and let the oil drain off via a drain
channel.
CAUTION
Waste oil must be disposed of in such a way that
it will not cause pollution!
(6) Screw the plugs (8-24/1 and 8-24/2) back in with new
gaskets.
(7) Fill in oil through the filling of the upper oil compartment
(8-8/arrow) until the oil reaches the lower edge of the oil
check hole (8-7/arrow).
(8) Fill in oil through the filling plug bore of the lower oil
compartment (8-23/arrow) until the oil reaches the lower
edge of the oil inspection bore (8-24/3).
Figure 8-23
Figure 8-24
Rear view Front view
Top view
Rear view Front view