mecalac AS 150e, Руководство по обслуживанию

Страница: 6 / 19

S160/S161/S165/Z162 8-6
8 Maintenance
1
2
Figure 8-9
Figure 8-8
Figure 8-7
Top view Front view
8.2.3.2 Oil level check distribution gear
Type 2:
(1) Open battery and tool compartment on the left side of
the loader.
(2) Move the bucket arm all the way to the left or right and
remove the front cover plate below the driver’s cabin in the
swivel unit area.
(3) Unscrew check plug (8-7/arrow) and sealing plug
(8-8/arrow) from the upper oil compartment (clutch
compartment).
(4) Unscrew the plug (8-9/1 and 8-9/2) from the lower oil
compartment (spur gear compartment).
NOTE
- The loader must have been standing still for at
least 15 minutes before you can check the oil
level.
- The transmission housing temperature must
be at least 60 °C (warm up if necessary).
- The oil level must reach the check hole (8-7/
arrow) of the upper oil compartment or the
sealing plug hole (8-9/2) of the lower oil
compartment.
- If necessary, fill oil into oil filling hole 8-8/arrow
(upper oil compartment) or 8-9/1 (lower oil
compartment) until the oil reaches the required
level.
- Collect any oil that escapes.
(5) Screw check plug (8-7/arrow) and sealing plugs
(8-8/arrow, 8-9/1 and 8-9/2) back in with new sealing
washers.