Mecal CDA10, Руководство по эксплуатации и обслуживанию

Страница: 53 / 119

CRIMP DATA ANALYZER
CDA10
REV.01
51
5.1.4 POSITIONING AND ASSEMBLING THE FORCE CELL SENSOR ON TT
AND P107 PRESSES
Follow the procedure below to install the load cell on
press models TT
and
P107
:
• Fit the T-connector support (A) with the two hex
socket head cap screws (N) on the press slide;
•
Insert the load cell sensor (C), interposing the plate (B)
and locking it with the T-connector (E);
• Insert the hex socket head cap screw (P) and tighten it
with a torque wrench,
setting a tightening torque of 7
Nm ;
•
Connect the plug (D) to the sensor.