Mecal CDA10, Руководство по эксплуатации и обслуживанию

Страница: 108 / 119

CRIMP DATA ANALYZER
CDA10
REV.01
106
Required qualification:
•
Complete training as an industrial mechanic, specialising in the technical automated systems
sector.
• Instruction and training on the machine are ensured by the Manufacturer.
Lubrication personnel
Typical activities:
• Regular operations to empty and fill lubricant tanks on systems;
• Checks of the lubricant level in the lubrication control units (where present);
•
Checks of the lubricant level at points of motion;
•
Cleaning of lubricant tanks and replacement of their contents (where present);
• Topping up of consumed lubricant reserves;
•
Replacing too old or used lubricants.
Required technical knowledge:
•
Knowledge of the lubricants and greases used in the various interventions;
• Ability to work independently according to pre-defined lubrication plans;
• Knowledge of the correct methods of eliminating used lubricants, in the context of
environmental protection.
Required qualification:
• This work can be carried out by qualified personnel who have undergone a sufficiently long
training period on the machine.
Mechanical maintenance personnel
Typical activities:
• Perform preventive maintenance, overhaul and, if necessary, repair of mechanical units, in
particular:
•
Checks on the execution of movements;
• Checks of mechanical clearance;
• Repair of mechanical units.
Required technical knowledge:
•
Substantial knowledge of mechanical, pneumatic and hydraulic installations;
•
Knowledge of numerical controls used on the machine;
• Fundamental knowledge of electrical control and regulation techniques;
• Ability to evaluate the results of reviews and to decide on necessary measures;
•
Knowledge on preparing audit reports;