Mecal CDA10, Руководство по эксплуатации и обслуживанию

Страница: 107 / 119

CRIMP DATA ANALYZER
CDA10
REV.01
105
Machine manager
Typical activities:
Quality control and maintenance on part handling systems, in particular:
• Use and evaluation of diagnostic system results;
•
Use of the machine in its normal operating conditions and restoration of operation after the
emergency stop switch has tripped;
• If necessary, quality control and taking the necessary quality maintenance measures;
• Cleaning of some parts of the machine (supporting elements, fixing elements);
•
Collaboration to perform the following activities:

Maintenance;

Troubleshooting and repairs.
Carrying out regular checks/verifications, in particular:
Regular checks/verifications, in particular:
• Seal check of piping;
• Lubrication effectiveness check;
• Check of the state of wear of protective devices;
•
Check of the state of wear of cables and flexible hoses;
•
Checks for the absence of oil leaks visible around the hydraulic systems, where present;
• Checks for the absence of foreign bodies in the machine work area;
• Operational check on signal lamps;
•
Checks of operating pressures and flow rates in the hydraulic, pneumatic where present,
lubrication systems.
Required technical knowledge:
• Knowledge of machine use;
• Knowledge of the lubricants used and the dangers associated with their use;
•
Logical search methods for failures and the evaluation of results;
• Ability to organise in order to command and direct the necessary measures to return the
machine to its functional state of use;
• Professional experience on handling systems for special pieces (automatic handling systems,
element handling systems, etc.);
• Basic knowledge of control techniques and pneumatic where present, hydraulic and electric
regulation.