Page 10
93924 – September 2015
60-J Diesel
Controls & Components
Platform Controls
ALWAYS check over, under and around the machine for personnel, structures and obstructions before
activating any control function and continue to watch for hazards while operating the machine
ART_4822
1
2
3
4
5
6
7
8
9
11
12
14
16
15
17
18
19
20
CONTROL
DESCRIPTION
1
Function Enable Button Press and hold this button to enable boom and platform operations.
2
Auxiliary Power
If normal power fails, press and hold while using Boom Retract and Boom Lower functions.
3
Start/Stop Switch
Move this switch up to start engine. Press this switch down to stop engine.
4
Glow Switch
Move this switch up to activate glow plugs prior to cold starting the engine.
5
Emergency Stop Switch
Press the EMERGENCY STOP switch at any time to stop all machine functions.
Turn switch
clockwise
to reset
6
Generator Switch
(Optional)
Turn switch ON to engage optional AC generator.
Generator switches off when any other function is enabled.
7
Engine Speed
Select Switch
Use this switch to set the engine speed when functions are enabled. Setting this switch to low idle
speed allows the operator to move the machine slowly and precisely.
Move this switch up for high idle speed and fast function speed.
Move this switch down for low idle speed and slow function speed.
8
High Capacity Switch
(Optional)
On machines equipped with the High Capacity option, use this switch to choose high or standard
capacities. To set the machine to High Capacity (750 lb (340 kg)), retract the boom, then move the
switch to the down position. The green High Capacity Indicator Light (#9) will illuminate when this
option is properly engaged. This will restrict the Boom Extend function reach and will allow the
machine to operate with more weight in the platform.
Move this switch up for 500 lb (227 kg) capacity and full boom range.
DO NOT
exceed the 500 lb (227 kg) unrestricted capacity unless the green High Capacity
Indicator Light (#9) is illuminated.