Page 46
84RT Seres Speed Level™ - Operator’s Manual
July 2021
Transport and Lifting Instructions
Safety Information
This section is provided for reference and does not supersede any
government or company policy regarding the loading, transport or lifting
of MEC machinery�����
Drivers are responsible for loading and securing machines, and should
be properly trained and authorized to operate MEC machinery����� Drivers
are also responsible for selecting the correct and appropriate trailer
according to government regulations and company policy����� Drivers must
ensure that the vehicle and chains are strong enough to hold the weight
of the machine (see the serial number plate for machine weight)�����
Loading - Free-wheel configuration for Winching or Towing
Prior to manually releasing brakes, be sure the wheels are chocked to
prevent machine from moving�����
RUNAWAY HAZARD!
After releasing the brakes there is nothing to stop machine travel�����
Machine will roll freely on slopes�����
The machine can be winched or towed short distances at speeds not to exceed 5 MPH (8.05 km/h).
Before towing or winching the machine, it is necessary to release the brakes. Reset the brakes after
towing or winching.
ART_2423
Hand Pump
Release Valve
Disengage Brakes before Towing or Winching
Chock the wheels.
Push and hold the release valve.
Using the hand pump on the manifold,
pump valve until pressure is built and valve
cannot be pumped.
Machine is now ready for towing.
Engage Brakes before Driving
Pull out the manual brake release valve to
reset brakes.
•
•
•
•
•
Note:
Brakes will reset automatically when drive function is activated.
Secton 15 - Transport and Lftng Instructons
Transport and Lifting Instructions