Page 30
84RT Seres Speed Level™ - Operator’s Manual
July 2021
Secton 10 - Machne Inspectons
Monthly Inspection Checklist
This checklist must be used at monthly intervals or every 100 hours of
machine use, whichever occurs first����� Failure to do so could result in
death or serious injury�����
Scheduled Maintenance Inspections should be conducted by qualified service technicians only.
Photocopy this page for reuse. Keep inspections records up to date. Record and report all
discrepancies to your supervisor.
Model Number
Serial Number
Perform all checks listed on Prestart Inspection.
Inspect the condition of hydraulic fluid in the reservoir. Oil should have a clear amber color.
Check battery electrolyte level and connections.
Check wheel lug nuts for proper torque (see Specifications).
Check if tires are leaning in or out.
Inspect all beams and pivot points for signs of wear and/or damage.
Check the pin joints and retaining rings for security.
Inspect the entire machine for signs of damage, broken welds, loose bolts, improper or makeshift repairs.
Check that the platform does not drift down with a full load.
Lubricate the king pins, steering cylinder pivot points, and tie rod ends (see Lubrication on page 36).
Check all wire connections.
Check that all adjustable flow valves are locked, check setting if any are not locked.
Lubricate the boom gear (see Lubrication on page 36).
Date
Inspected By
