Page 14
84RT Seres Speed Level™ - Operator’s Manual
July 2021
Secton 6 - Functons Test & Operatng Instructons
Dual Fuel Engine
ART_2410 R1
Fuel selection can be made before starting the engine or while engine
is running. If fuel selection is made while engine is running, only a
mnor
hesitation should occur.
Turn the Fuel Selector Switch to the desired fuel, GASOLINE or
PROPANE.
•
ART_3233
ART_3231
Press and hold the START button - release the button when the engine
starts.
Note:
Cold starts may require the CHOKE button to be pressed while pressing
the START button.
CAUTION - PREVENT STARTER DAMAGE:
Maxmum crankng tme s 10 seconds������ Wat 35 seconds between startng
attempts������ Falure to start after multple attempts ndcates possblty of
another problem������
•
•
Diesel Engine
ART_3233
ART_3232
Press and hold the START button - release the button when the engine
starts.
Cold Start:
press and hold the GLOW button as indicated in the Preheat
table.
With the GLOW Button held press and hold the START Button until the
engine starts.
Release both buttons once the engine starts.
Ambient Temperature
Preheat Time
Above 50°F (10°C)
5 Seconds
23°F to 50°F (-5°C to 10°C)
10 Seconds
Below 23°F (–5°C)
20 Seconds
20 Seconds = Maximum Limit of Preheat time
CAUTION - PREVENT STARTER DAMAGE:
Maxmum crankng tme s 10 seconds������ Wat 35 seconds between startng
attempts������ Falure to start after multple attempts ndcates possblty of
another problem������
•
•
•
•
•
Starting Engine from Upper Control Box
ART_3234
Lower Control Box:
Turn the Key Switch to PLATFORM.
