8
Emptying the water tank
1.
When the water tank is full, the ‘FULL’ light will turn on.
2. The dehumidifier will also make a buzzing sound
– to stop this, press the power button to turn
the machine off.
3. To empty the water tank, open the front panel. Hold the water tank by its handle and pull it out
horizontally.
4. Empty the water and reinsert the water tank. Close the front panel. The dehumidifier will
continue to run on the previous setting.
Continuous drainage
1. Open the front panel, remove the water tank and empty its contents.
2. Remove the plug and attach the drainage pipe to the connector. Direct the pipe to its desired
drainage outlet before turning the dehumidifier on.
3. Make sure the water tank and drainage pipe are not blocked. Shut the front panel.
4. The end of the drainage pipe should not be higher than the outlet hole. If the drainage pipe end
is not higher than the outlet hole, the water will not drain and it could damage internal
components of the dehumidifier.
5. If you wish to stop using continuous drainage and empty the water via the water tank, make
sure you reinsert the plug.