11
File Server application
70
V7.20160121
30302710-02-EN
File Server application
The File Server application is used to define a save location on the terminal. This save location can
be used by all ISOBUS implements which do not have their own USB interface. This enables the
updating of certain ISOBUS job computers, and also the possibility of saving, for example protocols
or error messages.
A "Fileserver" folder is created for this purpose on the hard disk of the terminal. All ISOBUS
implements can access this folder, and write or read data there.
The folder has a maximum disk space of 5 MB.
If you want to copy files to the terminal, these must be on your USB memory device, in the
"Fileserver" folder.
1. Call up the Fileserver application:
| Fileserver
⇨
The application starts screen will appear.
2.
- Press.
3.
- Copy files from the USB memory device to the terminal (Import).
4.
- Copy files from the terminal to the USB memory device (Export).
⇨
One of the following messages will appear: "Start import?" or "Start export?".
5. Click "Yes" to confirm.
⇨
The data will be copied.
⇨
A report will appear.
6. Confirm using "OK".
⇨
You have successfully imported or exported the data.
11
Procedure
