5
Basic control principles
Inputting data
26
V7.20160121
30302710-02-EN
Inputting data
All data must be entered on the data input screen.
Data input screen
Below the characters, you will find 5 icons which will assist you when entering the data.
Delete characters
Move cursor to the left
Move cursor to the right
Confirm and finish input.
No function
This is how you enter the data:
The data input screen has been opened:
1.
- Select the desired character.
2.
- Click on the selected character.
3. When all characters have been entered, select the "OK" symbol with the rotary button and click.
⇨
The input will be applied.
Using two terminals
The following table will tell you which settings you need to configure to be able to use two terminals,
and the chapters in which these are described. The specifications on the in-cab terminals are without
liability.
Parameter
Chapter
Run as auxiliary terminal
Setting the purpose of the terminal [
5.6
Controls
Procedure
5.7
