Basic control principles
Restarting the terminal
5
30302710-02-EN
V7.20160121
25
CAUTION
Danger of pressing the function keys without care
When pressing function keys, components of the connected machine can be moved or activated.
As a result, people can be injured and property damaged.
Before pressing a function key:
◦ Make sure you know what will happen when you press the function key.
◦ Consult the Operating Instructions of the connected machine or of the agricultural equipment to
establish what dangers could arise from pressing that key.
◦ Fulfill all the measures described in the machine's Operating Instructions in order to avoid
danger.
◦ Only press the function key when you are sure that no danger is posed to people or property.
When you press a function key, the function / operation depicted on the function icon will be
performed.
Using the function keys
Function icon
Depiction of an available function.
Function key
Performs the function depicted on the function
icon.
When you press the function key
, the function depicted on the function icon
will be
activated.
If not function icon appears next to a function key, this means that this function key has no function at
present.
Restarting the terminal
When restarting the terminal, you must give the connected jobcomputers enough time to restart as
well. For this reason, always wait approx. 30 seconds after switching off the terminal before switching
the terminal back on.
1.
- Switch off the terminal.
2. Wait 30 seconds until the jobcomputers have also been switched off.
3.
- Switch on the terminal.
Example
5.5
Procedure
