Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
7
2.5 Functions
The functions of the glass room temperature controller are divided into the areas of LCD display,
temperature control, ventilation control and configuration of the keys. In each area, the following
settings can be made:
LCD Display
The presentation and the brightness of the display can be set here. Furthermore the
language of the Display and an inverting of the colors can be set here.
Temperature Controller
The temperature controller is again divided into the following sub-menus:
o
Temperature measurement
In this menu, settings for temperature measurements, such as min / max values and
sensor configurations can be parameterized.
o
Alarm/Messages
Alarms / messages, which show falling below or exceeding certain temperatures, can be
set here. Also messages, which are shown at the display, can be set here.
o
Controller general
The desired function (Heating and/or Cooling) are set in this menu. Furthermore the
setpoints and operating modes can be set here.
o
Controller settings
If one type of controller is set, the behavior of the manipulated variable can be set here.
The setting options depend on the used controller.
Ventilation Control
The ventilation control allows the control of fans and can be controlled as well manually as
by the current value of the output value or by the difference between setpoint and current
value.
Key function of button C/D
The key function can be set as well grouped as separately. As well switching function as
shutter and dimming functions can be used.
