MDT Technologies AKH - 0800.01, Техническое руководство

Страница: 22 / 56

Technichal Manual Heating Actuators AKH
MDT technologies GmbH •
51766 Engelskirchen
• Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.mdt.de
22
4.2 Mode selection
Before you can start with the configuration of the channel, you have to select the mode of the
channel. The operating mode of a channel is pointed by the given input signal for the control value.
The ope ati g ode s it hi g Bit p o esses Bit alues, hi h se d o l the oth states
a d . These o t ol alues a e ost se t f o
-step-controllers or a PWM converted control
value. If a continuous signal, e.g. of a PI-control, is given, you have to select the operating mode
o ti uous B te . B the ode i teg ated o t olle , the heati g a tuato allo s ou to
process these values with a lot of controller functions.
The following illustration shows the selection window for the operation mode of the channels:
Figure 15: Mode selection
The following chart shows the available operating modes for each channel:
ETS-Text Dynamic range
[default value]
comment
Mode channel A-
D/H

Channel not active

switching (1Bit)

continuous (1Byte)

integrated controller
Adjustment of the operating
mode for the channel.
Table 17: Mode selection